International Fiber and Polymer Research Symposium

| Sign in | Sign Up

Home / 13th International Fiber and Polymer Research Symposium

Investigation of properties of denim fabrics from warp yarns containing hemp in different blending ratios

Authors :

ESRA AKGÜL¹

1- ERCIYES UNIVERSITY

Keywords :

Sustainability،Hemp،Denim،Breaking Strength،Tearing Strength،,

Abstract :

In this study, tear strength and breaking strength changes in weft and warp directions of denim fabrics produced from 100% cotton yarn and different hemp blend ratios were investigated. It has been observed that as the hemp ratio in the fabrics increases, the breaking strength in the warp direction decreases and the tearing strength increases. When hemp blended fabrics were compared to the control group fabric consisting of 100% cotton, a decrease was observed in the weft direction tearing strength and also a relative increase in the warp direction tearing strength was observed among the blended fabrics with the increase in the hemp fiber ratio.

List of archived papers

Removal of non-cellulosic materials from hemp fiber under ultrasonication conditions and cetyl trimethyl ammonium chloride (CTAC) catalyst

HATİCE SEÇİNTİ KLOPF

Effect of Fused Deposition Modeling (FDM) Process Parameters on Mechanical Properties of Woven Polymeric Structures

Shree Kaji Ghimire - Ashok Sapkota - Sabit Adanur - Emel Kuram - Recep Onler

Investigation of Maximum Stress Estimation of Fiber Reinforced Cementitious Matrix Composites by Using Machine Learning Approach

Ugur OZVEREN - Mete Simsek - Ezgi Lal BUDAK - Berkay HEPGULSUN - Ozge KAHRAMAN

Implementation of Lean Tool in a Knit Garment Factory for Improving Productivity

Ahsan Habib

Leafy Green Doğal Boyarmadde İçeren Boyama Reçetelerinin Haslık Özelliklerinin Geliştirilmesi

Halil İbrahim Turgut - Özlem Yarar

Functional Nanotexture for Atmospheric Water Harvesting (AWH) in Low Humidity Regions

Amin Esmaeili - Seyedmansour Bidoki - Ali Demir - Ahmet Kurklu - Bahman Boostani

Investigation of Intra-Ply Discontinuities on Mechanical Properties of Continuous E-Glass Fiber Reinforced Composite Beams

Ahmet Suha KILICOGLU - Metin TANOGLU

Polietilen Filmlerde Biyo Bazlı Antistatik Katkılarla Migrasyona Dayalı Statik Yük Kontrolü

Gülşah Demir - Sezgi Erdoğan

Utilizing discarded high-density polyethylene (HDPE) plastic for the production of sheath-core bicomponent filaments

Oumayma Rezguı - Fatih Süvari

Ön mordanlama gerektirmeyen boyalara mordan, soda ve koyulaştırıcı ajanın etkisi

Halil İbrahim TURGUT - Begüm SELÇUK ELGÜN - Özlem YARAR

more

Samin Hamayesh - Version 41.7.5