0% Complete
|
Sign in
|
Sign Up
Home
/
14th International Fiber and Polymer Research Symposium
Removal of non-cellulosic materials from hemp fiber under ultrasonication conditions and cetyl trimethyl ammonium chloride (CTAC) catalyst
Authors :
HATİCE SEÇİNTİ KLOPF
1
1- YOZGAT BOZOK UNIVERSITY
Keywords :
Ultrasonication،Pretreatment،Lignocelluloses،Hemp fiber،Cetyl trimethyl ammonium chloride (CTAC)
Abstract :
Non-cellulosic substances such as lignin, waxes, hemicelluloses and pectin present in the hemp fiber structure affect the mechanical performance of composites due to poor fiber/matrix adhesion. For this reason, hemp fiber is often pretreated before use in composite reinforcement. In this study, an ultrasonic-assisted pretreatment was applied using quaternary ammonium hydroxide to increase the degradation rate of non-cellulosic substances in hemp fiber. Cetyl trimethyl ammonium chloride (CTAC) concentrations ranging between 1 and 8% w/w were used with a constant (10% w/w) NaOH concentration. Hemp fiber surfaces were examined by scanning electron microscope (SEM). The results showed that ultrasonication-assisted alkali treatment removed non-cellulosic substances from the fiber surface. Fourier-transform infrared spectroscopy (FT-IR) and Thermogravimetric analysis (TGA) studies also confirmed the removal of these substances from hemp fiber.
Papers List
List of archived papers
Simultaneous enhancement of flame retardancy, thermal and mechanical properties of various nanofiller loaded bisphenol A polycarbonate/acrylonitrile-styrene-acrylate blends
H.Çağdaş ASLAN - Hale BERBER - Yasemin BALCIK TAMER
Developing of Intermediate Product for Type 4 and Type 5 Pressure Vessel Applications
CEM ALTINTAS
YUMUŞAK ÖRME KUMAŞLARIN ÜRETİMİNE YÖNELİK HİBRİD İPLİKLERİN TASARIMI VE ÜRETİMİ (G-SOFT)
Gonca YILDIZ PABUŞÇU - Ayşe TÜRKTAŞ ALİ - Timur ATİK
Production of PVP-based wound dressing loaded with Atovaquone
Almu'atasim Salameh
DEVELOPMENT OF ACRYLIC BASED ANTIMICROBIAL NANOFIBER MEMBRANES FROM ACRYLIZED CELLULOSE ACETATE BUTYRATE
Fadime ÇAKMAK KAYA
Degrade boyama yöntemi ile döşemelik kumaş geliştirilmesi
Sümeyra Oğuz - Hakan Altuncu
Comparative Study on The Manufacturing Techniques of PVDF Nanofibers: Electrospinning, Solution Blow Spinning, and Electro Blow Spinning
Ana Cespedes Matos - Eman Elessawy - Islam Shyha
Exploring the combined effects of wavy geometric designs and material stiffness on artificial blood vessel biomechanics
Galip Yilmaz
Electrospun Reduced Graphene Oxide Zinc Oxide Nanofibers for Uranium (VI) Adsorption
Ikbal Gozde Kaptanoglu - Sabriye Yusan - Umit H. Kaynar - Sule Aytas - Sema Erenturk
Implementation of Lean Tool in a Knit Garment Factory for Improving Productivity
Ahsan Habib
more
Samin Hamayesh - Version 41.7.5