0% Complete
|
Sign in
|
Sign Up
Home
/
15th International Fiber and Polymer Research Symposium
Geri dönüştürülmüş akrilik liflerinin iplik özelliklerine etkisinin incelenmesi
Authors :
Behzat Yıldırım
1
Dilara Muhacır
2
Muhammed İdris Aktaş
3
Mehmet Topalbekiroğlu
4
1- Gaziantep Üniversitesi,Tekstil Mühendisliği Bölümü, Gaziantep, Türkiye
2- Boyar Kimya San. ve Tic. A. Ş. Gaziantep, Türkiye
3- Boyar Kimya San. ve Tic. A. Ş. Gaziantep, Türkiye
4- Gaziantep Üniversitesi,Tekstil Mühendisliği Bölümü, Gaziantep, Türkiye
Keywords :
Sürdürülebilirlik،Geri dönüşüm،Akrilik،Kopma mukavemeti،% uzama،Düzgünsüzlük
Abstract :
The textile sector is one of the main industries that make intensive use of natural resources and raw materials. Raw materials used in textile production can cause serious environmental problems due to excessive use of resources such as water and energy. In recent years in particular, interest in and use of recycled textile products has increased in the context of sustainability. These developments are seen as an important step towards reducing the environmental impact of the sector. In this study, the quality parameters of yarns obtained by reprocessing acrylic waste from acrylic production lines into fiber form and blending them with conventional acrylic fibers were investigated. Four different samples were used in the study: 100% acrylic, acrylic/recycled acrylic 70/30, 60/40 and 50/50 weight ratio Nm 35/2 yarns. The tensile strength, % elongation, yarn defects such as thin place, thick place, neps, hairiness and unevenness (Um and CVm, %) of the acrylic blend yarns were analyzed. In the study, it was observed that the performance characteristics of acrylic yarns decreased as the recycled fiber content increased.
Papers List
List of archived papers
SYNTHESIS OF UV CURED POLYURETHANE DISPERSION
AYŞE BEGÜM CURA - Büşra KIRIM - Zekeriya Tepeli
Sabunlu Islak Mendilin Cilt Bariyeri Üzerindeki Etkisinin Farklı Temizlik Ürünleriyle Karşılaştırılması (A comparative study to evaluate the effect of soap-based wet wipes on skin barrier)
Eda Doğu
Investigation of the Recycling of Glass Fiber Reinforced Polyamide 6,6 Plastic Injection Wastes from the Production of Diesel Injector Sockets and Their Reuse in the Process
Elif Şahiner - Yasin ALTIN
Development of PLGA Nanofibers Enhanced with Curcumin/Ag Nanoparticles
Fatma Ahsen Oktemer - Cansu Gunes - M. Mert Kurdis - Ahmet Avci
Bölgesel Pazar Trendlerine Uygun Çevre Dostu Halı Geliştirilmesi
Ahmet ASLAN - Sümeyra OĞUZ
Blending waste and virgin high-density polyethylene (HDPE) for improved monofilament strength
Merve Çolak - Fatih Süvari - Selen Aslanmirza
Heat Diffusivity of Butyl Rubber Composite in the Presence of Boron Carbide Filler for Bladder Tire Curing Application
Mehdi Shiva - Dr. Amin Esmaeili - Morteza Golmohammadi
Sürdürülebilir Üçlü Lif Karışımının Dokuma Kumaş Performansa Etkisi
Emre CELAYIR
Advanced woven fabric performance by silver-loaded particle application
Yasemin Dülek - İpek Yıldıran - Buğçe Sevinç - Esra Mert - Cem Güneşoğlu
Özel Kesitlerin PLA Filament İpliğin Özelliklerine Etkisi
Onur ÇELEN - Hasan Basri KOÇER
more
Samin Hamayesh - Version 41.7.5