0% Complete
|
Sign in
|
Sign Up
Home
/
14th International Fiber and Polymer Research Symposium
Investigation of Properties of Self-Reinforcing Polypropylene Based Composite Material
Authors :
AŞKIN AYÇA YILDIRIM
1
AHMET HAKAN ÇINAR
2
ALPER KAŞGÖZ
3
1- Yalova University, Department of Polymer Materials Engineering, 77200 / YALOVA
2- Yalova University, Department of Polymer Materials Engineering, 77200 / YALOVA
3- Yalova University
Keywords :
Polymer،Fibers،Polypropylene،Self-Reinforced Composite Materials
Abstract :
Following the increasing significance of approaches related to sustainability, especially in recent years, the preparation of polymer composites with improved mechanical properties, particularly those that are recyclable, has gained importance. In this context, the preparation of self-reinforced polymer composites, which is an important method, and the investigation of their basic mechanical properties have been conducted. Within this scope, a high melt flow index polypropylene (PP) suitable for injection molding was prepared in the form of higher melting point fibers, and it was mixed with PP in different ratios using melt blending methods. Tensile and impact tests were applied to the obtained samples. The analysis results showed that by adding PP chopped fibers to the molten PP phase, both the elastic modulus and impact strength values could be enhanced. Additionally, it was observed during the study that production conditions and process parameter selections have a significant impact on the final product.
Papers List
List of archived papers
Melt spinning of polylactic acid/thermoplastic starch blend fibers: a brief review
Mohammad Ali Tavanaie - Ümit Hallis Erdoğan
Enhancing filtration performance with layered and bimodal nanofiber structures
ALİ TOPTAŞ - Ali Kılıç - Ali Demir
Bigbag üretiminde kullanılan dikiş iplerinin geri dönüştürülmüş plastik kaynaklarından üretilmesi ve uygulanabilirliği
Betül Gülgeç - Mehmet Zeybek - Erhan Demircan
Bikomponent ipliklerden elde edilmiş corduroy (atkılı kadife) kumaşta ultrasonik enerji kullanarak filament patlatma
Ramazan Gömeç
The mechanical performance of polyurethane foam on biomedical composite materials: A review
Bekir OZKAN
DOPO Akrilat ile Kaplanan Pamuklu Kumaşların Alev Geciktirici Özelliklerinin İncelenmesi
Aleyna Turanlı - Levent Babayiğit - Cemil Dızman
Polietilen Filmlerde Biyo Bazlı Antistatik Katkılarla Migrasyona Dayalı Statik Yük Kontrolü
Gülşah Demir - Sezgi Erdoğan
%100 Polyester dispers boyama atık sularının yeniden kullanımı ile sürdürülebilir bir dispers boyama reçetesinin geliştirilmesi
Begüm Selçuk Elgün - Halil İbrahim Turgut - Özlem Yarar
Examining the effects of CNTs added at different rates to carbon fiber composites on the amount of wear using the image processing method
İbrahim Demirci
Özel Kesitlerin PLA Filament İpliğin Özelliklerine Etkisi
Onur ÇELEN - Hasan Basri KOÇER
more
Samin Hamayesh - Version 41.7.5