0% Complete
|
Sign in
|
Sign Up
Home
/
15th International Fiber and Polymer Research Symposium
Mechanical and Thermo-Mechanical Performance of PBT/Short Glass Fiber Composites Containing the Different Impact Modifiers: A Comparative Analysis of Modifier Efficiency
Authors :
Cagrialp Arslan
1
1- Textile Engineering, Bartin University, 74100 Bartın, Türkiye.
Keywords :
Poly(butylene terephthalate)،short glass fiber،impact modifier،mechanical properties،thermo-mechanical properties
Abstract :
In this research study, three different impact modifiers were used to improve the interactions between phases in short glass fiber reinforced poly (butylene terephthalate) (PBT) composites, and the efficiency of the modifiers was comparatively analyzed. With this aim, three different compatibilizers, namely, ethylene–co–butyl acrylate (BA), ethylene–co–methyl acrylate–co–glycidyl methacrylate (GMA), and ethylene–co–butyl acrylate–co–maleic anhydride (MAH) are included into the PBT/SGF composite structure with the constant amount of 10 wt%. The extrusion process was conducted to melt the mixing of the ingredients. The specimens were molded for the mechanical tests in a lab-scale injection molding machine. Mechanical properties of the PBT matrix and the relevant composites were analyzed using tensile, flexural, and impact tests. The visco-elastic behavior of the samples was characterized by the dynamic mechanical analysis (DMA), as the micro-structural characterization was performed via SEM inspection. The optimum performance is achieved using the GMA impact modifier when the test results are considered. The compatibilizers used in the study show improvement mechanisms, particularly in impact properties. Considering the overall performance of the impact modifiers, the ranking was as follows: GMA > MAH > BA.
Papers List
List of archived papers
Hemoglobin Assisted Carbon Nanofiber Preparation For Selective Detection Of miRNA Molecules
Karima SAHTANI
Sürdürülebilir Üçlü Lif Karışımının Dokuma Kumaş Performansa Etkisi
Emre CELAYIR
Development of textile structures with multifunctional properties from sustainable fiber blends
Gökhan Tandoğan - Kıymet Kübra Denge
Enhancing Mechanical Properties of Polyethylene Fibers by Changing Process Conditions
Almu'atasim Salameh
The Current Situation, Challenges and Future Perspectives of Waste Management and Sustainability in Spinning Industry
Ahsan Habib - Osman Babaarslan
Kitosan Biyopolimerinin Tekstil Uygulanabilirliğinin Araştırılması
Halil İbrahim TURGUT - Aslı Balçak Girgin - Özlem Yarar
%100 Poliester filament ipliği ile üretilen süet efektli atkılı örme kumaş tasarımı
SELVER ZİLAN ERCOŞMAN - FATMA DEMİRCİ - KERİM ASLAN - YASEMİN KORKMAZ
Investigation of the effect of fabric construction on comfort and thermal protection in protective textiles
Fatih Çetin
YUMUŞAK ÖRME KUMAŞLARIN ÜRETİMİNE YÖNELİK HİBRİD İPLİKLERİN TASARIMI VE ÜRETİMİ (G-SOFT)
Gonca YILDIZ PABUŞÇU - Ayşe TÜRKTAŞ ALİ - Timur ATİK
Mechanical and Chemical Properties of CaCO3 Added Glass Fiber-Reinforced Composites
Hurrem CANITEZ - Ayse BEDELOGLU
more
Samin Hamayesh - Version 41.7.5