0% Complete
|
Sign in
|
Sign Up
Home
/
15th International Fiber and Polymer Research Symposium
Developing of Steel-GFRP Hybrid Leaf Spring for Commercial Vehicles
Authors :
Mehmet Deniz GUNES
1
Gediz KULAC
2
Goksel TOKGONUL
3
Taygun UZUNLAR
4
Sercan DAGLI
5
Hakan Salih ERDOGAN
6
1- Olgun Çelik San. ve Tic. A.Ş.
2- Olgun Çelik San. ve Tic. A.Ş.
3- Olgun Çelik San. ve Tic. A.Ş.
4- Olgun Çelik San. ve Tic. A.Ş.
5- Olgun Çelik San. ve Tic. A.Ş.
6- Olgun Çelik San. ve Tic. A.Ş.
Keywords :
steel-glass fiber reinforced polymer(GFRP) hybrid،leaf spring،spring rate،stress distrubition
Abstract :
Leaf springs are crucial suspension parts that absorb road irregularities for light-weight and middle weigth commercial vehicles. Convensional steel leaf springs have been commonly used for years due to their advantages like easy to design and processing. On the other hand, automotive industry has shown great attention for light-weigth structures in recent years for both fuel save and recent regulations for reducing carbon emmission. Due to all those facts, automotive OEM’s have increasingly demanded on conversion of steel parts to composite parts. Leaf sprins are great nominee for that conversion due to their light-weigth structures and superior mechanical behavior. In this reseach; conversion of multi-leaf steel leaf spring to steel composite leaf spring was investigated. Design, prototyping and characterization of equivalent hybrid leaf spring was studied. 35% weight reduction with no performance lose was gained as conclusion. Project goals: Design of steel-glass fiber reinforced polymer(GFRP) hybrid leaf spring wiht respect to equivalent steel leaf spring’s spring rate and stress distrubition 100.000 cycles of fatigue life 35% weight reduction in comparison with equivalent steel leaf spring
Papers List
List of archived papers
Leafy Green Doğal Boyarmadde İçeren Boyama Reçetelerinin Haslık Özelliklerinin Geliştirilmesi
Halil İbrahim Turgut - Özlem Yarar
Hava Tekstüre İplik Üretim Yöntemi ile Kaşe Görünümlü Döşemelik Kumaş Üretilmesi
Adem KARACA - Handan ÇALIŞKAN
DEVELOPMENT OF ACRYLIC BASED ANTIMICROBIAL NANOFIBER MEMBRANES FROM ACRYLIZED CELLULOSE ACETATE BUTYRATE
Fadime ÇAKMAK KAYA
Implementation of Lean Tool in a Knit Garment Factory for Improving Productivity
Ahsan Habib
Effects of textile waste generated during the production process on plasticizer diffusion from plasticized PVC films
Hasan Arıkan - Ayşe Pınar Tüzüm Demir
Synthesis and melt spinning of thermoplastic cellulose: A short review
Maryam Sabzi Mobarakeh - Mohammad Ali Tavanaie - Seyed Hajir Bahrami
Blending waste and virgin high-density polyethylene (HDPE) for improved monofilament strength
Merve Çolak - Fatih Süvari - Selen Aslanmirza
A study on nanoparticle extraction from natural fibers: hemp
Burhan Karateke - Nazire Deniz Yılmaz
Effect of vulcanization time on crosslinking of EPDM rubber
Alara Meryem Ayaz - Omer Yunus Gumus - Muhammet Kara
Development of Pickering Emulsion Hydrogels via Photopolymerization: Synthesis, Swelling Behaviour, and Antibacterial Activity
TUĞBA ŞİMŞEK - Fatma NUR PARIN - Uğur PARIN
more
Samin Hamayesh - Version 41.7.5