0% Complete
|
Sign in
|
Sign Up
Home
/
14th International Fiber and Polymer Research Symposium
Utilizing discarded high-density polyethylene (HDPE) plastic for the production of sheath-core bicomponent filaments
Authors :
Oumayma Rezguı
1
Fatih Süvari
2
1- Bursa Uludag University
2- Bursa Uludag University
Keywords :
Bicomponent filaments،HDPE،Waste plastic،Sheath-core،Recycling
Abstract :
The study aims to use waste material in the core of bicomponent filaments alongside virgin polymer in the sheath to improve mechanical properties and address environmental concerns. Using waste and virgin HDPE polymers, we conducted experiments with varying extruder speeds to analyse filament count and breaking force. Results indicate a direct relationship between extruder speed and filament count, with higher speeds leading to increased production. Statistical analysis reveals significant improvements in breaking force with higher filament counts. The formation of sheath-core bicomponent filaments results in a more than 67% improvement in tensile strength compared to monofilaments produced from entirely waste HDPE. However, the strength of bicomponent filaments decreases with a higher proportion of waste polymer in the core component, while an increase in virgin polymer in the sheath component enhances strength. These findings underscore the importance of optimizing manufacturing parameters to achieve desired mechanical properties and the potential of bicomponent filaments in utilizing waste materials effectively.
Papers List
List of archived papers
Sustainable Innovation: Hazelnut Shell-Enhanced Polypropylene Composites for Eco-Friendly Automotive Applications
Aysu ÇAVUŞOĞLU - Naci UYSAL - Melih YAZICI - Pelin ŞAHİN - İdris KARAGÖZ
Wound healing potential of fabricated PCL/CNPs/Ferula asefoetida extract nanofiber
Samaneh Kamalipooya - Davood Nasrabadi - Morteza Golmohammadi - Shohreh Fahimirad - Dr. Amin Esmaeili
Akrilik Filament İpliğin Hacimliliğinin Arttırılması
Ecem Fırat
Okra plant: Alternative agro-residual biomass as a cellulose source
Burhan Karateke - Nazire Deniz Yılmaz
Investigation of Multiple Layered Velostat-Based Force Sensitive Resistor for Insole Pressure Sensing
Mehmet Durmus Calisir
Eco-friendly composite production using thermoset waste from the automotive industry as filler material
Aysu Çavuşoğlu - Pelin Şahin - Naci Uysal - İdris Karagöz
The Current Situation, Challenges and Future Perspectives of Waste Management and Sustainability in Spinning Industry
Ahsan Habib - Osman Babaarslan
Compressive Strength of PU Foam/Spacer Fabric Composite Structures
MHD MANSOUR NAKAWA
Sabunlu Islak Mendilin Cilt Bariyeri Üzerindeki Etkisinin Farklı Temizlik Ürünleriyle Karşılaştırılması (A comparative study to evaluate the effect of soap-based wet wipes on skin barrier)
Eda Doğu
Prediction of Marshall Strength in Polymer-Modified Thin-Layer Asphalt Using Decision Tree Regression and Bayesian Optimization
Uğur ÖZVEREN - Ozan Derya KAYA - Ayserin Pelin YILMAZ - Burce PEKER - Idil Sena BAYRAK - Kabil Bilgic
more
Samin Hamayesh - Version 41.7.5