0% Complete
|
Sign in
|
Sign Up
Home
/
13th International Fiber and Polymer Research Symposium
Investigation of effects of MoEpPOSS nanoparticle on the morphological and rheological properties of PA6/TPE blends
Authors :
İpek Yakar
1
1- Kocaeli university
Keywords :
polyamid 6،POSS،rheological properties،thermoplastic elastomer
Abstract :
Polyamide 6 (PA6) is an engineering thermoplastic with the advantages of high resistance to chemicals and abrasion, high fatigue resistance and toughness. However, it has some disadvantages such as low impact strength and notch sensitivity. These disadvantages of PA6 can be improved by blending it with elastomers. Recently, thermoplastic elastomers (TPE) have been frequently used to toughen notch-sensitive polymers such as PA6 due to their superior properties such as high elasticity, recyclability and easy processing. As it is known, obtaining superior properties in polymer blends depends on the interfacial interaction between the components of the polymer blend. Additionally, by using compatibilizers, blends with the required properties can be created by enhancing interaction between phases, or interfacial adhesion. Recently, polyhedral oligomeric silsesquioxane (POSS) nanoparticles, organic/inorganic hybrid nanoparticles, are preferred as an alternative compatibilizer to conventional types. In this study, PA6/TPE blends having continuous phase TPE were compatibilized with MoEpPOSS nanoparticles with single epoxy groups for the first time in the literature. The blends were prepared using a laboratory-scale Xplore micro-compounder and then molded using a Xplore micro-injection device to obtain standard test samples. The rheological and morphological properties of PA6/TPE blends compatibilized with MoEpPOSS nanoparticle were investigated.
Papers List
List of archived papers
YUMUŞAK ÖRME KUMAŞLARIN ÜRETİMİNE YÖNELİK HİBRİD İPLİKLERİN TASARIMI VE ÜRETİMİ (G-SOFT)
Gonca YILDIZ PABUŞÇU - Ayşe TÜRKTAŞ ALİ - Timur ATİK
Grafen oksit, karbon nanotüpler ve bor nitrür katkılarının karbon fiber takviyeli kompozitlerin mekanik özellikleri üzerine etkileri
Samet ALTINTAŞ
Examining the effects of CNTs added at different rates to carbon fiber composites on the amount of wear using the image processing method
İbrahim Demirci
Hibrit Malzemelerin Darbe Karakteristiğine FDM Tipi 3B Yazıcı Üretim Sıcaklığının Etkisinin İncelenmesi
Tarkan AKDERYA - Rumeysa İNCESU - Ataberk KAPLAN - Gülbahar TABAKOĞLU - Buket OKUTAN BABA
Morus Alba özütlü doğal boyarmadde ile yapılan pamuklu boyamalarda farklı boya konsantrasyonlarının etkisi ve sürdürülebilir proses optimizasyonu
Halil İbrahim TURGUT - Aslı BALÇAK GİRGİN - Özlem YARAR
Bioactive compound-loaded PVA nanofibers inhibit the proliferation of Glioblastoma cells
Melis Ercelik - Cagla Tekin - Busra Mutlu - Fatmanur Parin - Kenan Yildirim - Berrin Tunca
The mechanical performance of polyurethane foam on biomedical composite materials: A review
Bekir OZKAN
Tekstil tabanlı easy clean, su geçirmez, güç tutuşur duvar kâğıdı tasarımı
Canan Öztürk - Nejla Değirmenci - Kadriye Kutlay
Chemical Safety and Ergonomics: ESTAŞ's Chemotherapy Glove Production
Ebru Yabas - Rahmi Canpolat - Esra Kayas - Fatih Ozaydın
Bigbag üretiminde kullanılan dikiş iplerinin geri dönüştürülmüş plastik kaynaklarından üretilmesi ve uygulanabilirliği
Betül Gülgeç - Mehmet Zeybek - Erhan Demircan
more
Samin Hamayesh - Version 41.7.5