International Fiber and Polymer Research Symposium

| Sign in | Sign Up

Home / 13th International Fiber and Polymer Research Symposium

Investigation of the Recycling of Glass Fiber Reinforced Polyamide 6,6 Plastic Injection Wastes from the Production of Diesel Injector Sockets and Their Reuse in the Process

Authors :

Elif Şahiner¹ Yasin ALTIN²

1- Bursa Technical University 2- Bursa Technical University

Keywords :

Mechanical Recycling،Automotive Composites،PA66،Glass Fiber Reinforced Composites،Injection Molding

Abstract :

Increasing environmental concerns caused by the overuse of synthetic materials are drawing attention to sustainable materials along with a circular economy approach using the world's recycling pathways. The automotive industry is a sector where polymeric materials are used extensively, and important steps need to be taken to recycle waste. The use of recycled plastics in critical automotive components is not recommended by Orginal Equipment Manufacturers (OEMs). However, on the other hand, the utilization of production wastes in value-added products is important in terms of sustainability. In this study, the effect of diesel injector socket injection waste on the material mechanical performance when reused at 4 different rates (%2.5, %5, %10, %15) in the same process was examined.

List of archived papers

Klima tozunun merserizasyon atık suyu ile temizlenmesine yönelik sürdürülebilir çevreci bir yöntem

Halil İbrahim TURGUT - Özlem YARAR

Gıda uyumlu antistatik masterbatch geliştirilmesi ve endüstriyel kullanımı

Elif Kıymaz - Betül Gülgeç

Tekstil endüstrisinde kullanılan atık durumundaki haşıllı denim üstüpü ve haşıllı non-denim üstüpü ipliklerin farklı sıcaklıklarda karbonizasyonunun incelenmesi

Yunus Önal - Dilek Şarapnal - Furkan Matur

%100 Poliester filament ipliği ile üretilen süet efektli atkılı örme kumaş tasarımı

SELVER ZİLAN ERCOŞMAN - FATMA DEMİRCİ - KERİM ASLAN - YASEMİN KORKMAZ

RECYCLE KATKILI POLİPROPİLEN İPLİK VE DÖŞEMELİK KUMAŞ GELİŞTİRİLMESİ

Hasan Tuna

Effect of Efficient Production Planning on Productivity in Garments Industry of Bangladesh

Ahsan Habib

Preparation and characterization of pH-indicative films based on poly(butylene succinate)/anthocyanin

Bedriye Ucpinar

Geri dönüştürülmüş akrilik liflerinin iplik özelliklerine etkisinin incelenmesi

Behzat Yıldırım - Dilara Muhacır - Muhammed İdris Aktaş - Mehmet Topalbekiroğlu

Pes içerikli çadır bezi kumaşı eldesinde farklı emdirme ve kaplama metodlarının su geçirmezlik ve güç tutuşurluk özellikleri üzerindeki etkisi

Halil İbrahim TURGUT - Begüm Selçuk ELGÜN - Özlem YARAR

Determining the optimal cabin insulator: Examination of odour, sound absorption behaviour, cost, and formability characteristics of ten felt composites

Sude Sarma - Murat Kağan VATANSEVDİ

more

Samin Hamayesh - Version 41.7.5