17th International Fiber and Polymer Research Symposium

:: | | Sign in | Sign Up

ulpas@ulpas.org

Home / 13th International Fiber and Polymer Research Symposium

Investigation of the Recycling of Glass Fiber Reinforced Polyamide 6,6 Plastic Injection Wastes from the Production of Diesel Injector Sockets and Their Reuse in the Process

Authors :

Elif Şahiner¹ Yasin ALTIN²

1- Bursa Technical University 2- Bursa Technical University

Keywords :

Mechanical Recycling،Automotive Composites،PA66،Glass Fiber Reinforced Composites،Injection Molding

Abstract :

Increasing environmental concerns caused by the overuse of synthetic materials are drawing attention to sustainable materials along with a circular economy approach using the world's recycling pathways. The automotive industry is a sector where polymeric materials are used extensively, and important steps need to be taken to recycle waste. The use of recycled plastics in critical automotive components is not recommended by Orginal Equipment Manufacturers (OEMs). However, on the other hand, the utilization of production wastes in value-added products is important in terms of sustainability. In this study, the effect of diesel injector socket injection waste on the material mechanical performance when reused at 4 different rates (%2.5, %5, %10, %15) in the same process was examined.

List of archived papers

Advantages of fluorosilicone polymers, aging properties and advance oil resistance performance

Hande Eyvazoğlu - Mucize Ceren Miçonunoğlu - Büşra Doğanay Alçiçek

Synthesis and melt spinning of thermoplastic cellulose: A short review

Maryam Sabzi Mobarakeh - Mohammad Ali Tavanaie - Seyed Hajir Bahrami

A STUDY ABOUT DIFFERENT FIBERS USABILITY ON FLAT KNITTED FABRICS IN AUTOMOTIVE TEXTILES

Benamir FIDANCI - Emir BALTACIOGLU - Osman AYDIN

Examining the effects of CNTs added at different rates to carbon fiber composites on the amount of wear using the image processing method

İbrahim Demirci

Otomotiv Tekstillerinde Kapok Elyaf Kullanımının Akustik Performansa Etkisinin İncelenmesi

Zeliha Cavus

Modification of PLGA Nanofibers with Ag Nanoparticles Produced by Green Synthesis and Their Use in Wound Healing

Muhammed Onur Avcı - Edanur Korkmaz - Çisem Gilik - Mustafa Mert Kurdiş - Cansu Güneş - Ahmet AVCI

Investigation of the Recycling of Glass Fiber Reinforced Polyamide 6,6 Plastic Injection Wastes from the Production of Diesel Injector Sockets and Their Reuse in the Process

Elif Şahiner - Yasin ALTIN

Kitosan biyopolimerinin dispers baskı ve emdirme uygulamalarındaki koyulaştırma etkisi

HALİL İBRAHİM TURGUT - ÖZLEM YARAR - BEGÜM SELÇUK ELGÜN

Exploring the slippage behaviour of carbon FRP textile fiber in masonry reinforcement applications: insights from testing

Sıtkı Halit Canol - Engin Akçagün - Abdurrahim Yılmaz - Hafiz Faisal Siddique

Development of polymer nanocomposites with improved mechanical and functional properties via stereolithography technique

Nuray Kizildag

more

Samin Hamayesh - Version 44.5.0